Mate-Fin

3 Part Horizontal Door Hot Cell

 

 

 

  
 
  • Industry exclusive three part sliding horizontal doors. The center section of the door contains a 12" x 10" x 6" (30 x 25 x 15 cm) thick 5.2 g/cc density lead glass window that acts as a body shield when working inside the cell.
  • Chevron brick design is used for greater strength and to prevent gaps or open seams on all walls, roof and floor of the cell. (Standard Design contains 2 3/8" (60 mm) lead bricks: however, 3" (76 mm) bricks are available upon request).
  • Interior is lined completely with seamless stainless steel.
  • Dose calibrator chamber is mounted flush, recessed into the floor of the cell and suspended on a support bracket with a 2 3/8" (60 mm) lead positron shield (7300-2903).
  • The front wall contains two ports (which may be plugged) for the insertion of remote manipulator arms.
  • All utilities, penetrations, dimensions and ancillary shielding can be custom designed to meet your facilities requirements.
   Capintec Hot Cells/Isolators are specifically manufactured for radiopharmaceutical research, production and/or processing. Our Hot Cells are sophisticated, lead lined containers that provide maximum radiation protection. Isolators are available with Class 100 uniform downward air flow.
Vezi toti partenerii
matefin.com CopyRight | All Rights Reserved

Back to Top